Pinhole Camera with Magnetic Installation

Pinhole Camera with Magnetic Installation

Request Access or Login

This covert video pinhole camera makes the job of installation easy.  Included with it is an installation tool, just attach the included adhesive and steel ring, and press the assembly against the concealment (whatever material your concealing behind).  When removed, you'll have an exact marking of where the hole should be drilled.  After that, just attach the pinhole camera with the included magnetic ring...and you're done!  

With the small size of 0.45" x 0.40", concealment is possible almost anywhere.  Even with the very small size, the resolution is 400 TVL, the low light rating is 0.1 lux, and the signal-to-noise ratio is a high 50db, which means you'll get excellent low light performance. 

Voltage tolerance is a wide 5 to 12VDC with a low current draw of 45mA.  Output is NTSC and for connection to standard DVRs and transmitters, RCA connections are included.  For use with more advanced surveillance equipment, a 4 PIN output is available for interfacing with the MAXSUR SPIKE and BARB covert micro DVRs. 

 

pinhole camera installation

SPECIFICATIONS
Imager 1/4" Color CCIQ v2 Camera
Pixels 648 x 488 NTSC
Resolution 400 TVL
Scanning 60 Fields per second
Minimum Illumination 0.1 lux @ f1.2
S/N Ratio More than 50dB 
MCEX4P-F Lens 3.9MM / f2.8
MCEX4P-L Lens 4.0MM / f2.0
Dimensions 0.45" x 0.40" (11.5 x 10.3mm) (D x W)